INSTALL

STEP ONE

Apply supplied glue to the adjoining ends.
Spread evenly, coating the entire surface of each end

STEP TWO

Insert the corner connectors in the slots.
Press with thumb or tap lightly with a hammer until
fully inserted. Wipe of any excess glue with a damp rag.

STEP THREE

Pre-fit your frame against the mirror. Once it is in place,
press the placement corners into both upper inside corners.
Remove frame. Remove tape backing. set frame back on top
of placement corners and press frame firmly into place. Remove
corners. Stand back and admire your gorgeous MirrorMate frame!