Apply supplied glue to the adjoining ends.
Spread evenly, coating the entire surface
of each end
STEP TWO
Insert the corner connectors in the slots.
Press with thumb or tap lightly with a hammer
until
fully inserted. Wipe of any excess glue
with a damp rag.
STEP THREE
Pre-fit your frame against the mirror.
Once it is in place,
press the placement
corners into both upper inside corners.
Remove frame. Remove tape backing.
set frame back on top
of placement corners
and press frame firmly into place.
Remove
corners.
Stand back and admire
your gorgeous MirrorMate frame!
